FAQ

CB radio FAQs: repair, antennas & setup

Clear, practical answers for common CB radio problems, antenna questions, SWR readings, static, microphones, and complete setups.

Can you repair my CB radio?+

Yes. Send a repair request with the radio model, the symptoms, and any relevant setup details. The shop can review the problem and let you know the best next step.

What should I include with a repair request?+

Include the radio model, what it is doing or not doing, and any setup details that may matter. For antenna-related problems, include the antenna type, mount location, coax condition, and any SWR readings you have taken.

Can you help me choose a complete CB radio setup?+

Yes. Custom CB Radios carries radios, antennas, mounts, coax, microphones, and accessories. Start with how and where you use the radio so the equipment can work together instead of creating problems later.

What is a good SWR reading for a CB antenna?+

Lower is better. A reading at or below 1.5:1 is a practical target for a mobile CB setup. Readings above 2:1 should be checked before regular transmitting, because the issue may be the antenna length, mount, ground connection, coax, or connector.

Do I need to tune a new CB antenna?+

Usually, yes. Even a new antenna may need adjustment after it is installed because the vehicle, mount, placement, ground connection, and coax all affect the system. Check SWR on channel 1 and channel 40 before using the radio regularly.

Do you work with both CB and 10 meter radios?+

The store carries CB and 10 meter equipment and can review repair requests for either type. Include the exact model in your request so the shop can point you toward the right next step.

Can a better microphone make my CB radio clearer?+

A noise-cancelling microphone can help reduce cab noise and make your voice easier to understand. It will not solve an antenna or radio fault, so confirm the rest of the system is working before replacing a microphone.

My CB radio turns on but will not transmit. What should I check first?+

Start with the microphone connection, the antenna system, the coax and the SWR reading. A radio that powers up can still be held back by a loose microphone plug, a damaged cable, a poor mount connection, or an antenna issue. Avoid regular transmitting until the antenna system has been checked.

Why does my CB radio have static or engine noise?+

Start by separating normal receive hiss from a repeatable sound that changes with the vehicle or an accessory. Check the power connection, coax, antenna mount and recent changes before adding a filter or replacing the radio. A clear description of when the noise appears makes troubleshooting much more useful.

When should I request a CB radio repair?+

Request a repair when the symptom remains after the basic setup checks, or when the radio has a clear fault such as no transmit, no receive, intermittent controls, physical damage, or a problem that persists across a known-good antenna system. Include the model and the steps you have already taken.

Need more than a quick answer?

Use the guide that matches the problem before buying a part or sending a repair request. It keeps the radio, antenna, coax, mount, and microphone in the same conversation, so the next step fits the actual setup.